Additional information
Weight | 10 kg |
---|---|
Dimensions | 40 × 18 × 10 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
$55.00 inc. GST
At McHitch we have developed our own special, heavy duty tow tongue range. With extra thick walls and base plate, they come in three size drops:
1 & a 1/4 inch
2 inch
and 4 inch.
Finished in quality black gloss powdercoat, they feature a standard 7/8″ hole size to suit our standard 3.5tonne tapered pins (the same shank size as the standard ball coupling).
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
Available on back-order
Weight | 10 kg |
---|---|
Dimensions | 40 × 18 × 10 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
Only logged in customers who have purchased this product may leave a review.
This is our more economical locking and securing pin that features a 304 stainless steel construction, a snap on rubber weatherproof cap to protect the insides of the lock, two keys and a securing clip. A dual-purpose pin that can be used through the body of any McHitch Drop-On coupling, as well as used through the drawbar on any square mouth receiver.
Additionally, this lock can also be used as an antitheft lock while your camper is parked up, locking this pin through a face of the hitch. As a bonus, this pin can be used to lever the top of the Aluminium heads on our Platinum Drop-On Couplings, to tighten and loosen.
This is our standard replacement universal joint that go in all of our 6 tonne couplings (Drop-On and Automatic). We have made sure to use a reliable type of universal joint that is greasable, tough as nails and one that is also easy to obtain.
This is our standard replacement universal joint that go in all of our 2, 3.5 and 4.5tonne couplings (Drop-On and Automatic). We have made sure to use a reliable type of universal joint, that is greasable and one that is also easy to obtain. Do you know how we know that these are near unbreakable?
These are the same uni joints that Toyota Landcruisers have been running for years, in conditions that are far more extreme than what we are utilising them for. So you can have peace of mind knowing that these will probably last longer than the trailer itself.
This tapered tow pin by McHitch Couplings is a fit for all our 2 tonne and 3.5Tonne Drop-On Platinum couplings. Quality 304 stainless steel construction comes with spring washer and nut.
Remember, no grease is needed on these pins because no movement is placed upon them. This features a longer 50mm shank (standard thread of 7/8″ diameter). They never wear out or rust!
Set of 4, 1/2′ X 4″ long, Hi Tensile bolt set, These are the extra long bolts that are specially suited to our brake over-ride couplings, for both the drop-on and automatic models.
These adaptor plates are used when hooking up a drop on coupling onto a Weight distributing head. It replicates the surface of a normal tow tongue.
You can see the adaptor painted silver in the top picture.
This gives the tapered pin a nice flat even area for it to seat, and for the coupling to clamp down onto.
Comes with a spacing washer to go under the plate (if needed) and instructions for installation.
(DO NOT PLACE WASHER DIRECTLY UNDER THE TOW PIN).
Adaptor plate, roll pin and spacing washer included in pack.
Towpin and weight distributing head are for illustrative purposes only.
Website still under construction. Some Products and features are missing and may not work. Please contact us on 0431 022 908 for support. Dismiss
Reviews
There are no reviews yet.