Additional information
Weight | 5 kg |
---|---|
Dimensions | 20 × 10 × 20 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
$42.90 inc. GST
This is our standard replacement universal joint that go in all of our 6 tonne couplings (Drop-On and Automatic). We have made sure to use a reliable type of universal joint that is greasable, tough as nails and one that is also easy to obtain.
Weight | 5 kg |
---|---|
Dimensions | 20 × 10 × 20 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
Only logged in customers who have purchased this product may leave a review.
t McHitch we have developed our own special, FORGED CHROMOLY,
tow tongues! These are the toughest tongues on the market by far. They come in two sizes that can also be inverted!
2 inch and 4 inch.
Finished in quality black gloss powdercoat, this tongue features a standard 7/8″ hole size to suit our standard 3.5tonne tapered pins, and our automatic receivers (the same shank size as the standard ball coupling).For Rangers, Pajeros Sport & models with short towbar receivers.
These tongues are rated to a massive 4.5tonne capacity with a max A-frame weight of 450kg.
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
This is our standard replacement universal joint that go in all of our 2, 3.5 and 4.5tonne couplings (Drop-On and Automatic). We have made sure to use a reliable type of universal joint, that is greasable and one that is also easy to obtain. Do you know how we know that these are near unbreakable?
These are the same uni joints that Toyota Landcruisers have been running for years, in conditions that are far more extreme than what we are utilising them for. So you can have peace of mind knowing that these will probably last longer than the trailer itself.
The Big Boy, Our largest coupling we make, capable of a huge 6 tonne capacity, to replace pintle and rings and others for use on large, heavier scale equipment.
This 6 Tonne coupling takes a 1&1/4″ threaded shank. (May need to enlarge existing 7/8″ tow tongue hole to 1&1/4″).
Fully ADR 62/02 tested and compliant.
* A super low height of 125mm at its highest point. This is lowest coupling on the market.
*Capable of over 90 degrees of movement on every axis.
Choose from the options below for the type of weight distributing head you have. Pictured are all the major types.
If you have a standard tow tongue (no Weight Distributing Head (WDH) set-up)
Choose option 1
For Weight Distributing Heads, we offer an adaptor pack for an extra $50 that includes an adaptor plate, and a set of WDH bar rollers.
If you have either:
*Hayman Reese WDH
*Eaz Lift WDH
*Quick lift STANDARD offset WDH
Choose Option 2
The whole kit includes: Coupler, receiver, laser-cut ratchet handbrake, stainless steel locking hitch pin, yellow magnetic sight marker and fitting instructions.
This tapered tow pin by McHitch Couplings is a fit for the 3.5 tonne “Easy Fit” Drop-On Platinum coupling. Quality 304 stainless steel construction comes with spring washer and nut.
Remember, no grease is needed on these pins because no movement is placed upon them. This features a larger 1 & 1/4″ shank is rated up to 4.5 tonne They never wear out or rust!
This tapered tow pin by McHitch Couplings is a fit for our 4.5 tonne Drop-On Platinum couplings. Quality 304 stainless steel construction comes with spring washer and nut.
Remember, no grease is needed on these pins because no movement is placed upon them. This features a 50mm shank and will fit standard tow tongues as well as weight distributing heads. Has a standard thread size 7/8″ diameter. They never wear out or rust!
This tapered tow pin by McHitch Couplings is a fit for our 6 tonne Drop-On Platinum couplings. It features a 50mm shank and will fit standard tow tongues as well as weight distributing heads.
Quality 304 stainless steel construction comes with spring washer and nut. Remember, no grease is needed on these pins because no movement is placed upon them. Has a larger thread size of 1 – 1/4″ diameter, so the hole in either the tow tongue or Weight Distributing Head may have to be enlarged. They never wear out or rust!
Website still under construction. Some Products and features are missing and may not work. Please contact us on 0431 022 908 for support. Dismiss
Reviews
There are no reviews yet.