Additional information
Weight | 5 kg |
---|---|
Dimensions | 20 × 10 × 20 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
$27.50 inc. GST
This tapered tow pin by McHitch Couplings is a fit for all our 2 tonne and 3.5Tonne Drop-On Platinum couplings. Quality 304 stainless steel construction comes with spring washer and nut.
Remember, no grease is needed on these pins because no movement is placed upon them. This features a longer 50mm shank (standard thread of 7/8″ diameter). They never wear out or rust!
Weight | 5 kg |
---|---|
Dimensions | 20 × 10 × 20 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
Only logged in customers who have purchased this product may leave a review.
This tapered tow pin by McHitch Couplings is a fit for the 3.5 tonne “Easy Fit” Drop-On Platinum coupling. Quality 304 stainless steel construction comes with spring washer and nut.
Remember, no grease is needed on these pins because no movement is placed upon them. This features a larger 1 & 1/4″ shank is rated up to 4.5 tonne They never wear out or rust!
This by far our most popular model, it replaces just about all other couplings in its weight range, it has a standard bolt hole pattern for ease of fitment. Join the many thousands now singing the praises of this great Aussie invention!
Fully ADR 62/02 tested and compliant.
* A super low height of 125mm at its highest point. This is lowest coupling on the market.
*Capable of over 90 degrees of movement on every axis.
The bolt hole dimensions (centre to centre) are a standard size of 185mm x 55mm, can easily be manipulated slightly due to the holes being elongated.
Choose from the options below for the type of weight distributing head you have. Pictured are all the major types.
If you have a standard tow tongue (no Weight Distributing Head (WDH) set-up)
Choose option 1
For Weight Distributing Heads, we offer an adaptor pack for an extra $50 that includes an adaptor plate, and a set of WDH bar rollers.
If you have either:
*Hayman Reese WDH
*Eaz Lift WDH
*Quick lift STANDARD offset WDH
Choose Option 2
The whole kit includes: Coupler, receiver, laser-cut ratchet handbrake, stainless steel locking hitch pin, yellow magnetic sight marker and fitting instructions.
This is our standard replacement universal joint that go in all of our 6 tonne couplings (Drop-On and Automatic). We have made sure to use a reliable type of universal joint that is greasable, tough as nails and one that is also easy to obtain.
These adaptor plates are used when hooking up a drop on coupling onto a Weight distributing head. It replicates the surface of a normal tow tongue.
You can see the adaptor painted silver in the top picture.
This gives the tapered pin a nice flat even area for it to seat, and for the coupling to clamp down onto.
Comes with a spacing washer to go under the plate (if needed) and instructions for installation.
(DO NOT PLACE WASHER DIRECTLY UNDER THE TOW PIN).
Adaptor plate, roll pin and spacing washer included in pack.
Towpin and weight distributing head are for illustrative purposes only.
At McHitch we have developed our own special, FORGED CHROMOLY,
tow tongues! These are the toughest tongues on the market by far. They come in two sizes that can also be inverted! For Rangers, Pajero Sport & models with short towbar receivers .
2 inch and 4 inch.
Finished in quality black gloss powdercoat, this tongue features an oversize 1-1/4″ hole size to suit our larger 6tonne tapered pins, and our 6tonne automatic receivers.
These tongues are rated to a massive 6tonne capacity with a max A-frame weight of 600kg.
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
The Big Boy, Our largest coupling we make, capable of a huge 6 tonne capacity, to replace pintle and rings and others for use on large, heavier scale equipment.
This 6 Tonne coupling takes a 1&1/4″ threaded shank. (May need to enlarge existing 7/8″ tow tongue hole to 1&1/4″).
Fully ADR 62/02 tested and compliant.
* A super low height of 125mm at its highest point. This is lowest coupling on the market.
*Capable of over 90 degrees of movement on every axis.
Choose from the options below for the type of weight distributing head you have. Pictured are all the major types.
If you have a standard tow tongue (no Weight Distributing Head (WDH) set-up)
Choose option 1
For Weight Distributing Heads, we offer an adaptor pack for an extra $50 that includes an adaptor plate, and a set of WDH bar rollers.
If you have either:
*Hayman Reese WDH
*Eaz Lift WDH
*Quick lift STANDARD offset WDH
Choose Option 2
The whole kit includes: Coupler, receiver, laser-cut ratchet handbrake, stainless steel locking hitch pin, yellow magnetic sight marker and fitting instructions.
Website still under construction. Some Products and features are missing and may not work. Please contact us on 0431 022 908 for support. Dismiss
Reviews
There are no reviews yet.