Additional information
Weight | 10 kg |
---|---|
Dimensions | 40 × 18 × 10 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
$66.00 inc. GST
At McHitch we have developed our own special, heavy duty tow tongue range. With extra thick walls and base plate, they come in three size drops:
1 & a 1/4 inch
2 inch
and 4 inch.
Finished in quality black gloss powdercoat, they feature a standard 7/8″ hole size to suit our standard 3.5tonne tapered pins (the same shank size as the standard ball coupling).
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
Available on back-order
Weight | 10 kg |
---|---|
Dimensions | 40 × 18 × 10 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
Only logged in customers who have purchased this product may leave a review.
At McHitch we have developed our own special, FORGED CHROMOLY,
tow tongues! These are the toughest tongues on the market by far. They come in two sizes that can also be inverted! For Rangers, Pajero Sport & models with short towbar receivers .
2 inch and 4 inch.
Finished in quality black gloss powdercoat, this tongue features an oversize 1-1/4″ hole size to suit our larger 6tonne tapered pins, and our 6tonne automatic receivers.
These tongues are rated to a massive 6tonne capacity with a max A-frame weight of 600kg.
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
At McHitch we have developed our own special, FORGED CHROMOLY,
tow tongues! These are the toughest tongues on the market by far. They come in two sizes that can also be inverted! For Rangers, Pajero Sport & Models with short towbar receivers.
2 inch and 4 inch.
Finished in quality black gloss powdercoat, this tongue features an oversize 1-1/4″ hole size to suit our larger 6tonne tapered pins, and our 6tonne automatic receivers.
These tongues are rated to a massive 6tonne capacity with a max A-frame weight of 600kg.
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
This is the newest coupling we have to offer, the same physical size and footprint as the 3.5 tonne, but now with upgraded parts like the hi-tensile chromoly shaft, a 7/8″ and 1-1/4″ shank stud are included as well as a set of 9/16″ hi-tensile bolts. This now capable and ADR approved to a huge 4.5 tonne capacity! It has a standard bolt hole pattern for ease of fitment. Due to the larger diameter bolts, the nuts may have to be mounted on top, with the bolt head underneath.
Fully ADR 62/02 tested and compliant.
* A super low height of 125mm at its highest point. This is lowest coupling on the market.
*Capable of over 90 degrees of movement on every axis.
The bolt hole dimensions (centre to centre) are a standard size of 185mm x 55mm, can easily be manipulated slightly due to the holes being elongated.
Choose from the options below for the type of weight distributing head you have. Pictured are all the major types.
If you have a standard tow tongue (no Weight Distributing Head (WDH) set-up)
Choose option 1
For Weight Distributing Heads, we offer an adaptor pack for an extra $50 that includes an adaptor plate, and a set of WDH bar rollers.
If you have either:
*Hayman Reese WDH
*Eaz Lift WDH
*Quick lift STANDARD offset WDH
Choose Option 2
The whole kit includes: Coupler, receiver, laser-cut ratchet handbrake, stainless steel locking hitch pin, yellow magnetic sight marker and fitting instructions.
Set of 4, 1/2′ X 4″ long, Hi Tensile bolt set, These are the extra long bolts that are specially suited to our brake over-ride couplings, for both the drop-on and automatic models.
A dual-purpose pin that can be used through the body of any McHitch Drop-On coupling, as well as being used through the drawbar on any square mouth receiver. As a bonus, can be used to lever the top of the Aluminium heads on our Platinum Drop-On Couplings, to tighten and loosen.
This is our premium handbrake to suit our 3.5 tonne, 4.5 tonne and 6 tonne couplings. Quality thick gauged, zinc plated steel, with a super clean laser cut ratchet and comfortable rubber grip.
Elongated holes for ease of fitment. 55mm centre to centre of mount holes.
Reviews
There are no reviews yet.