Additional information
Shipping Weight | 1 kg |
---|---|
Shipping Dimensions | 30 × 30 × 6.5 cm |
$49.99 inc. GST
By delivering a wider surface area, the base allows a more stable and safer recovery and prevents the High Lift Jack from sinking into soft ground such as sand and mud.
Tough plastic construction
High visibility orange colouring
Strong lightweight & durable
Non-slip textured base for added grip
Increased footprint & support
Suitable for most High Lift Jacks
Base size: 295mm x 295mm x 65mm
Shipping Weight | 1 kg |
---|---|
Shipping Dimensions | 30 × 30 × 6.5 cm |
Only logged in customers who have purchased this product may leave a review.
Also known as a damper or recovery blanket, they are one of the most important safety accessories you can own.
Designed to eliminate the whipping action of a strap or winch cable in the event of a failure, they reduce the possibility of personal injury and vehicle damage. The damper comes in a high visibility safety orange with reflective tape for both day & night use.
To install, simply fold the dampener over the strap or cable and position midway between the vehicle and recovery strap.
An extension strap is the ideal accessory to any winch, either hand or electric. They are used to extend the length of a winch cable should it not be long enough to anchor to a suitable recovery point once fully extended.
Size: 10m x 60mm.
8000kg minimum breaking strength.
Blue polyester webbing.
Reinforced eyelets protectors.
2x Neoprene stitching protectors
Our 11,000kg five piece recovery kit has been developed for those who demand more from their 4WD experience. Based on the popular five piece standard recovery kit, the premium kit upgrades to an 11 tonne snatch strap and two 5 tonne heavy duty bow shackles, as well as the new look recovery bag to store it all in.
Having a fully stocked and properly maintained recovery kit is an essential accessory for any 4WD enthusiast. It is very important to have quick and easy accessibility to all your recovery equipment. Each Mean Mother recovery kit has been carefully tailored to include the correct equipment for most recovery situations. Ideally suited to the 4WD adventurist who may or may not have a winch fitted to their vehicle. The 5 piece kit requires the assistance of another vehicle to complete a snatching recovery.
All Mean Mother snatch straps are tested to meet the highest quality and strength standards. They are manufactured from 100% treated nylon webbing with reinforced eyelets to prolong operational life. Similar to a rubber band, a snatch strap being stretched between two vehicles generates a kinetic energy pulling force as the strap returns to its original length. The combination of the recovery vehicle pull and the pulling force from the strap creates a “snatching” effect that can heave a stranded vehicle free from being bogged or unable to move under its own power.
Note! When using a snatch strap carefully follow the safety guidelines set out in the instruction sheet included with each kit.
When used in accordance with the “Guidelines for safe use of vehicle Recovery Straps”, vehicles may be recovered with minimal risk of injury to people or damage to vehicle equipment.
All Mean Mother snatch straps are made from quality nylon webbing with 20% elongation. All our snatch straps meet Australian standards.
The equaliser strap has been designed to evenly distribute the load on your vehicle during a recovery operation when connected to two rated recovery points. They are generally used in conjunction with a snatch strap or extension strap. Mean Mother equaliser straps are equipped with a protective sleeve on the strap webbing.
Size: 2.5m x 75mm.
12,000kg minimum breaking strength.
Polyester low elongation webbing.
Movable protective sleeve in the middle.
Reinforced eyelet protectors.
Shackles are an essential recovery item and you can never have too many of them. They are most commonly used to attach recovery straps, tree trunk protectors, winch extension straps & snatch blocks. The larger 4.7 tonne shackles are best suited to electric winch recovery situations.
High visibility.
Max capacity 5000kg
Size: 19mm pin 5.0T
W.L.L. compliant with AS/NZS 2741.2002 load requirements.
TIP: To avoid seizing the screw pin, its always a good idea to back off about 1/2 to 1 turn after fully hand tightening. Shackle pins can seize due to the force exerted during recovery operations.
Before use: Inspect shackles before and after use for any damage. If pins are hard to turn or the shackle has been overstressed, it should be immediately replaced.
Caution: Shackles can become a lethal missile if something should break or fail during a recovery. Ensure that all spectators are well clear and all recovery lines have a dampening blanket on them (Refer page 41). Never load a shackle across its width because the load will be imposed on the threads. The force must be at right angles to the pin.
Here’s 5 reasons why ours won’t
Won’t flatten your Battery:
Our Series Wound Motor combined with Quiet 3 Stage Planetary Gears ensures Superior Line Speed under Load and lower Amp Draw so it won’t flatten your Battery
Rope is protected against sharp rocks:
Rope Rock Protector Sheath protects the first 2m of the Rope from Rock Abrasions which can cause premature Failure
Easily Engage and Disengage Gearbox
with our Heavy Duty Clutch Handle
Peace of mind when pulling up hill:
Our Automatic in Drum Brake System will engage automatically to hold the heaviest 4x4s on the steepest Tracks
Eyelet won’t crush under load:
Our Eyelets have a reinforced Gusset for Superior Strength
You can trust our Clevis Hook won’t fail:
It’s made using Die Forged Carbon Steel with Heat Treatment
Reviews
There are no reviews yet.