Additional information
Shipping Weight | 3 kg |
---|---|
Shipping Dimensions | 20 × 10 × 20 cm |
$16.99 Original price was: $16.99.$14.99Current price is: $14.99. inc. GST
Shackles are an essential recovery item and you can never have too many of them. They are most commonly used to attach recovery straps, tree trunk protectors, winch extension straps & snatch blocks. The larger 4.7 tonne shackles are best suited to electric winch recovery situations.
High visibility.
Max capacity 4700kg
Size: 19mm pin 4.7T
W.L.L. compliant with AS/NZS 2741.2002 load requirements.
* A shackle’s break point is six times the WLL (working load limit) when compliant with the standard.
TIP: To avoid seizing the screw pin, its always a good idea to back off about 1/2 to 1 turn after fully hand tightening. Shackle pins can seize due to the force exerted during recovery operations.
Before use: Inspect shackles before and after use for any damage. If pins are hard to turn or the shackle has been overstressed, it should be immediately replaced.
Caution: Shackles can become a lethal missile if something should break or fail during a recovery. Ensure that all spectators are well clear and all recovery lines have a dampening blanket on them (Refer page 41). Never load a shackle across its width because the load will be imposed on the threads. The force must be at right angles to the pin.
Shipping Weight | 3 kg |
---|---|
Shipping Dimensions | 20 × 10 × 20 cm |
Only logged in customers who have purchased this product may leave a review.
All Mean Mother snatch straps are tested to meet the highest quality and strength standards. They are manufactured from 100% treated nylon webbing with reinforced eyelets to prolong operational life.
Similar to a rubber band, a snatch strap being stretched between two vehicles generates a kinetic energy pulling force as the strap returns to its original length. The combination of the recovery vehicle pull and the pulling force from the strap creates a “snatching” effect that can heave a stranded vehicle free from being bogged or unable to move under its own power.
* High tenacity nylon webbing.
* Reinforced eyelets.
* Thermo fixed and treated for longer wear.
* High elongation of 20%.
Minimum Breaking Strength (MBS)
It is recommended that the minimum breaking strength of the strap/rope should be between 2 and 3 times the vehicle’s gross vehicle mass (GVM) *GVM means the maximum loaded mass (including the vehicle’s chassis, body, engine, engine fluids, fuel, accessories, driver, passengers and cargo) of a vehicle as specified by the vehicle manufacturer on a plate affixed to the vehicle or assessed by the road authorities in the absence of a plate.
When using a snatch strap carefully follow the safety guidelines set out in the instruction sheet included with each kit.
When used in accordance with the “Guidelines for safe use of vehicle Recovery Straps”, vehicles may be recovered with minimal risk of injury to people or damage to vehicle equipment.
All Mean Mother snatch straps are made from quality nylon webbing with 20% elongation. All our snatch straps meet Australian standards.
Our heavy duty 8,000kg eight piece recovery kit has been developed for those who demand more from their 4WD experience.
Based on the popular 8 piece standard recovery kit, the premium kit upgrades to an 8 tonne snatch strap and two 4.75 tonne heavy duty bow shackles, an 8 tonne extension strap, and a 12 tonne tree trunk protector, as well as the new look large recovery bag to store it all in.
Having a fully stocked and properly maintained recovery kit is an essential accessory for any 4WD enthusiast. It is very important to have quick and easy accessibility to all your recovery equipment.
Each Mean Mother recovery kit has been carefully tailored to include the correct equipment for most recovery situations. Best suited to the 4WD enthusiast who has a winch fitted to their vehicle. Designed to maximise winch capabilities, performance and versatility. This 8 piece kit offers the ability to self recover or perform a snatching recovery.
All Mean Mother snatch straps are tested to meet the highest quality and strength standards. They are manufactured from 100% treated nylon webbing with reinforced eyelets to prolong operational life.
Similar to a rubber band, a snatch strap being stretched between two vehicles generates a kinetic energy pulling force as the strap returns to its original length. The combination of the recovery vehicle pull and the pulling force from the strap creates a “snatching” effect that can heave a stranded vehicle free from being bogged or unable to move under its own power.
Note! When using a snatch strap carefully follow the safety guidelines set out in the instruction sheet included with each kit.
When used in accordance with the “Guidelines for safe use of vehicle Recovery Straps”, vehicles may be recovered with minimal risk of injury to people or damage to vehicle equipment.
All Mean Mother snatch straps are made from quality nylon webbing with 20% elongation. All our snatch straps meet Australian standards.
All Mean Mother snatch straps are tested to meet the highest quality and strength standards. They are manufactured from 100% treated nylon webbing with reinforced eyelets to prolong operational life. Similar to a rubber band, a snatch strap being stretched between two vehicles generates a kinetic energy pulling force as the strap returns to its original length. The combination of the recovery vehicle pull and the pulling force from the strap creates a “snatching” effect that can heave a stranded vehicle free from being bogged or unable to move under its own power.
* High tenacity nylon webbing.
* Reinforced eyelets.
* Thermo fixed and treated for longer wear.
* High elongation of 20%.
Minimum Breaking Strength (MBS)
It is recommended that the minimum breaking strength of the strap/rope should be between 2 and 3 times the vehicle’s gross vehicle mass (GVM) *GVM means the maximum loaded mass (including the vehicle’s chassis, body, engine, engine fluids, fuel, accessories, driver, passengers and cargo) of a vehicle as specified by the vehicle manufacturer on a plate affixed to the vehicle or assessed by the road authorities in the absence of a plate.
When using a snatch strap carefully follow the safety guidelines set out in the instruction sheet included with each kit.
When used in accordance with the “Guidelines for safe use of vehicle Recovery Straps”, vehicles may be recovered with minimal risk of injury to people or damage to vehicle equipment.
All Mean Mother snatch straps are made from quality nylon webbing with 20% elongation. All our snatch straps meet Australian standards.
Having a fully stocked and properly maintained recovery kit is an essential accessory for any 4WD enthusiast. It is very important to have quick and easy accessibility to all your recovery equipment.
Each Mean Mother recovery kit has been carefully tailored to include the correct equipment for most recovery situations. Best suited to the 4WD enthusiast who has a winch fitted to their vehicle. Designed to maximise winch capabilities, performance and versatility. This 8 piece kit offers the ability to self recover or perform a snatching recovery
All Mean Mother snatch straps are tested to meet the highest quality and strength standards. They are manufactured from 100% treated nylon webbing with reinforced eyelets to prolong operational life.
Similar to a rubber band, a snatch strap being stretched between two vehicles generates a kinetic energy pulling force as the strap returns to its original length. The combination of the recovery vehicle pull and the pulling force from the strap creates a “snatching” effect that can heave a stranded vehicle free from being bogged or unable to move under its own power.
Note! When using a snatch strap carefully follow the safety guidelines set out in the instruction sheet included with each kit.
When used in accordance with the “Guidelines for safe use of vehicle Recovery Straps”, vehicles may be recovered with minimal risk of injury to people or damage to vehicle equipment.
All Mean Mother snatch straps are made from quality nylon webbing with 20% elongation. All our snatch straps meet Australian standards.
The multi-directional hitch receiver provides an ideal connection point for most general winch or strap recoveries. Made from high strength steel it is the only safe way to attach a recovery device to a vehicles towing system. Hitch comes complete with a 4.7T coated bow shackle.
Designed to suit Class 4 towbars.
50mm (2″) x 50mm (2″) receivers.
4.7 tonne working load limit.
Powercoated hi-vis bow shackle.
Solid steel construction.
Complies to AS/NZ 2741.2002.
Overall Length: 175mm.
Here’s 5 reasons why ours won’t
Won’t flatten your Battery:
Our Series Wound Motor combined with Quiet 3 Stage Planetary Gears ensures Superior Line Speed under Load and lower Amp Draw so it won’t flatten your Battery
Rope is protected against sharp rocks:
Rope Rock Protector Sheath protects the first 2m of the Rope from Rock Abrasions which can cause premature Failure
Easily Engage and Disengage Gearbox
with our Heavy Duty Clutch Handle
Peace of mind when pulling up hill:
Our Automatic in Drum Brake System will engage automatically to hold the heaviest 4x4s on the steepest Tracks
Eyelet won’t crush under load:
Our Eyelets have a reinforced Gusset for Superior Strength
You can trust our Clevis Hook won’t fail:
It’s made using Die Forged Carbon Steel with Heat Treatment
Reviews
There are no reviews yet.