Additional information
Weight | 5 kg |
---|---|
Dimensions | 20 × 10 × 20 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
$66.00 inc. GST
This tapered tow pin by McHitch Couplings is a fit for our 6 tonne Drop-On Platinum couplings. It features a 50mm shank and will fit standard tow tongues as well as weight distributing heads.
Quality 304 stainless steel construction comes with spring washer and nut. Remember, no grease is needed on these pins because no movement is placed upon them. Has a larger thread size of 1 – 1/4″ diameter, so the hole in either the tow tongue or Weight Distributing Head may have to be enlarged. They never wear out or rust!
Weight | 5 kg |
---|---|
Dimensions | 20 × 10 × 20 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
Only logged in customers who have purchased this product may leave a review.
At McHitch we have developed our own special, heavy duty tow tongue range. With extra thick walls and base plate, they come in three size drops:
1 & a 1/4 inch
2 inch
and 4 inch.
Finished in quality black gloss powdercoat, they feature a standard 7/8″ hole size to suit our standard 3.5tonne tapered pins (the same shank size as the standard ball coupling).
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
t McHitch we have developed our own special, FORGED CHROMOLY,
tow tongues! These are the toughest tongues on the market by far. They come in two sizes that can also be inverted!
2 inch and 4 inch.
Finished in quality black gloss powdercoat, this tongue features a standard 7/8″ hole size to suit our standard 3.5tonne tapered pins, and our automatic receivers (the same shank size as the standard ball coupling).For Rangers, Pajeros Sport & models with short towbar receivers.
These tongues are rated to a massive 4.5tonne capacity with a max A-frame weight of 450kg.
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
At McHitch we have developed our own special, FORGED CHROMOLY,
tow tongues! These are the toughest tongues on the market by far. They come in two sizes that can also be inverted! For Rangers, Pajero Sport & models with short towbar receivers.
2 inch and 4 inch.
Finished in quality black gloss powdercoat, this tongue features a standard 7/8″ hole size to suit our standard 3.5tonne tapered pins, and our automatic receivers (the same shank size as the standard ball coupling).
These tongues are rated to a massive 4.5tonne capacity with a max A-frame weight of 450kg.
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
This great quality locking pin is made of stainless steel paired with a chrome plated steel locking barrel, a snap on rubber weatherproof cap to protect the insides of the lock, two keys and a securing clip.
A dual-purpose pin that can be used through the body of any McHitch Automatic coupling, as well as used through the drawbar on any square mouth receiver. Additionally, this lock can also be used as an antitheft lock while your camper is parked up by locking this pin through a face of the hitch.
This is the newest coupling we have to offer, the same physical size and footprint as the 3.5 tonne, but now with upgraded parts like the hi-tensile chromoly shaft, a 7/8″ and 1-1/4″ shank stud are included as well as a set of 9/16″ hi-tensile bolts. This now capable and ADR approved to a huge 4.5 tonne capacity! It has a standard bolt hole pattern for ease of fitment. Due to the larger diameter bolts, the nuts may have to be mounted on top, with the bolt head underneath.
Fully ADR 62/02 tested and compliant.
* A super low height of 125mm at its highest point. This is lowest coupling on the market.
*Capable of over 90 degrees of movement on every axis.
The bolt hole dimensions (centre to centre) are a standard size of 185mm x 55mm, can easily be manipulated slightly due to the holes being elongated.
Choose from the options below for the type of weight distributing head you have. Pictured are all the major types.
If you have a standard tow tongue (no Weight Distributing Head (WDH) set-up)
Choose option 1
For Weight Distributing Heads, we offer an adaptor pack for an extra $50 that includes an adaptor plate, and a set of WDH bar rollers.
If you have either:
*Hayman Reese WDH
*Eaz Lift WDH
*Quick lift STANDARD offset WDH
Choose Option 2
The whole kit includes: Coupler, receiver, laser-cut ratchet handbrake, stainless steel locking hitch pin, yellow magnetic sight marker and fitting instructions.
This by far our most popular model, it replaces just about all other couplings in its weight range, it has a standard bolt hole pattern for ease of fitment. Join the many thousands now singing the praises of this great Aussie invention!
Fully ADR 62/02 tested and compliant.
* A super low height of 125mm at its highest point. This is lowest coupling on the market.
*Capable of over 90 degrees of movement on every axis.
The bolt hole dimensions (centre to centre) are a standard size of 185mm x 55mm, can easily be manipulated slightly due to the holes being elongated.
Choose from the options below for the type of weight distributing head you have. Pictured are all the major types.
If you have a standard tow tongue (no Weight Distributing Head (WDH) set-up)
Choose option 1
For Weight Distributing Heads, we offer an adaptor pack for an extra $50 that includes an adaptor plate, and a set of WDH bar rollers.
If you have either:
*Hayman Reese WDH
*Eaz Lift WDH
*Quick lift STANDARD offset WDH
Choose Option 2
The whole kit includes: Coupler, receiver, laser-cut ratchet handbrake, stainless steel locking hitch pin, yellow magnetic sight marker and fitting instructions.
Reviews
There are no reviews yet.