Additional information
Weight | 5 kg |
---|---|
Dimensions | 20 × 10 × 20 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
$27.50 inc. GST
This tapered towpin by McHitch Couplings is a fit for the 3.5Tonne “Easy Fit” Drop-On Platinum coupling with weight distributing bars. Quality 304 stainless steel construction comes with spring washer and nut.
Remember, no grease is needed on these pins because no movement is placed upon them. This features a longer 75mm shank (standard thread of 7/8″ diameter). They never wear out or rust!
Weight | 5 kg |
---|---|
Dimensions | 20 × 10 × 20 cm |
Tongue Variant | To suit Standard Tow Tongue, To suit Weight Distribution Head |
Only logged in customers who have purchased this product may leave a review.
This is the newest coupling we have to offer, the same physical size and footprint as the 3.5 tonne, but now with upgraded parts like the hi-tensile chromoly shaft, a 7/8″ and 1-1/4″ shank stud are included as well as a set of 9/16″ hi-tensile bolts. This now capable and ADR approved to a huge 4.5 tonne capacity! It has a standard bolt hole pattern for ease of fitment. Due to the larger diameter bolts, the nuts may have to be mounted on top, with the bolt head underneath.
Fully ADR 62/02 tested and compliant.
* A super low height of 125mm at its highest point. This is lowest coupling on the market.
*Capable of over 90 degrees of movement on every axis.
The bolt hole dimensions (centre to centre) are a standard size of 185mm x 55mm, can easily be manipulated slightly due to the holes being elongated.
Choose from the options below for the type of weight distributing head you have. Pictured are all the major types.
If you have a standard tow tongue (no Weight Distributing Head (WDH) set-up)
Choose option 1
For Weight Distributing Heads, we offer an adaptor pack for an extra $50 that includes an adaptor plate, and a set of WDH bar rollers.
If you have either:
*Hayman Reese WDH
*Eaz Lift WDH
*Quick lift STANDARD offset WDH
Choose Option 2
The whole kit includes: Coupler, receiver, laser-cut ratchet handbrake, stainless steel locking hitch pin, yellow magnetic sight marker and fitting instructions.
Identical to our big 6 tonne coupler, this 4.5 tonne kit comes with the standard 7/8″ shank (standard towball size threaded shank) for ease of fitment.
where as a 6 Tonne coupling takes a 1&1/4″ threaded shank.
* A super low height of 125mm at its highest point. This is lowest coupling on the market.
*Capable of over 90 degrees of movement on every axis.
Choose from the options below for the type of weight distributing head you have. Pictured are all the major types.
If you have a standard tow tongue (no Weight Distributing Head (WDH) set-up)
Choose option 1
For Weight Distributing Heads, we offer an adaptor pack for an extra $50 that includes an adaptor plate, and a set of WDH bar rollers.
If you have either:
*Hayman Reese WDH
*Eaz Lift WDH
*Quick lift STANDARD offset WDH
Choose Option 2The whole kit includes: Coupler, receiver, laser-cut ratchet handbrake, stainless steel locking hitch pin, yellow magnetic sight marker and fitting instructions.
Set of 4, 1/2′ X 4″ long, Hi Tensile bolt set, These are the extra long bolts that are specially suited to our brake over-ride couplings, for both the drop-on and automatic models.
These are a brand new idea that McHitch could see needed improving. McHitch have utilised harend steel rollers to roll along the length of the existing WDH bars.
This results in a smoother, and more silent operation of the bars without a lot of the usual creaking, groaning and carrying on that the bars usually do.
These are how they should have been made in the first place.
Can be used with any WDH set up. For all different width bars, choose spacers and bolt lengths as necessary. Sold as a pair to do both arms.
These are an optional fitment for our drop-on couplings, and we highly recommend these roller kits for our Automatic range of hitches.
This tapered tow pin by McHitch Couplings is a fit for our 6 tonne Drop-On Platinum couplings. It features a 50mm shank and will fit standard tow tongues as well as weight distributing heads.
Quality 304 stainless steel construction comes with spring washer and nut. Remember, no grease is needed on these pins because no movement is placed upon them. Has a larger thread size of 1 – 1/4″ diameter, so the hole in either the tow tongue or Weight Distributing Head may have to be enlarged. They never wear out or rust!
At McHitch we have developed our own special, FORGED CHROMOLY,
tow tongues! These are the toughest tongues on the market by far. They come in two sizes that can also be inverted! For Rangers, Pajero Sport & models with short towbar receivers .
2 inch and 4 inch.
Finished in quality black gloss powdercoat, this tongue features an oversize 1-1/4″ hole size to suit our larger 6tonne tapered pins, and our 6tonne automatic receivers.
These tongues are rated to a massive 6tonne capacity with a max A-frame weight of 600kg.
These are a standard fit into any Hayman Reese type square receiver with a 2 inch opening.
Reviews
There are no reviews yet.